• Home
  • About Us
  • Products
  • Production Capacity
  • News
  • Inquiry
  • Customer Visiting
  • Contact Us
  • Your location: Home » Products > Wire Mesh Series

    Welded wire mesh panel

      

    Welded Wire Mesh Panel

    Welded mesh reinforcement bars are from 3 to 40mm diameter, located in mutually perpendicular direction and forming a square or rectangular shape mesh. Reinforcing mesh opening size ranging from 50mm to 250mm. Distinguish heavy reinforcing mesh (diameter rods of 12mm and above) and light meshes (the diameter of the rods from 3mm up to 12mm).
    When choosing a wire mesh, material, mesh sheet size, mesh opening, and the purpose must be taken into account. For example, if you need concrete mesh for plastering, the thin wire mesh is suitable.

    concrete reinforcing mesh specification:
    Materials: stainless steel rebar, galvanized steel rods.
    Diameter: 3mm - 40mm.
    Steel rods style: ribbed or smooth.
    Mesh opening shape: square or rectangular.
    Distance between rods 100 , 200, 300 , 400 and 500mm.
    Mesh sheet width 065m - 3.8 m, and length from 850mm, 6m, 9m, 12m.
    Mesh sizes 6.0m × 2.4m, 4.80m × 2.4m, 3.6m × 2m, 2m × 4m.

      

      

    he reinforcing steel mesh has become an integral component of reinforced concrete structures and is used to enhance them, catalog as below
    • Mesh reinforcement for the foundation, In the civil and industrial construction special attention and increased demands placed on the quality of the foundation, because it depends on the operational safety and durability of structures.
    • Masonry reinforcement mesh - the most popular type of wire mesh . It is referred to the building grid and used as a reinforcing element in the construction of reinforced concrete and masonry buildings. Masonry reinforcement mesh increases the strength of the structure and quality of plastering work. For the manufacture of masonry reinforcement wire mesh used steel wire diameter of 3 to 5mm. The mesh size ranges from 50mm to 250mm.
    • Mesh reinforcement for the floor. This mesh is packaged in roll form. It is very convenient for delivery, because the diameter of the wire used is relatively small. The length of such a mesh size not more than two meters, which facilitates its transportation.
    • Reinforcement mesh used in road works to strengthen the road surface. This mesh is made from stainless steel with diameter of 3mm, 4mm, or 5mm. Its composition with low carbon content allows qualitatively strengthen road terrain. The reinforcing road mesh is the most cost-effective option for construction and repair of roads, bridges, and large industrial plants. Usually, road mesh opening in sizes 50 × 50mm, 100 × 100mm, 125 × 125mm, 150 × 150mm. Its sheet sizes may be 1.5 × 2m, 2 × 3m, 2 × 6m.
    • Trench mesh is long, narrow sheets of concrete reinforcing mesh, ideally sizes for trenches, paths or other narrow spaces. Its longitudinal wires (main wire ) from 7.6mm up to 15.6mm diameter, and cross wire in 4mm or 4.77mm diameter. Trench rib mesh all comes 6.0m length.

     

    Recommended Products
    Copyright © 2014 Xunqiang Wiremesh Products Co.,LTD All Rights Reserved